We built this infrared halogen heater lamp for engineers who need serious, focused heat—without taking up a ton of space. This isn’t about making a room feel cozy. It’s about direct, raw radiant energy that jumps to action fast, delivering high heat density exactly where you need it, right inside your machine. Here’s the thing: the specs were chosen to play nice with real-world industrial setups and tight mounting spots. It runs on 400V, so you can plug it straight into standard high-voltage lines. That keeps the current lower and the wiring losses manageable. And with 2500W packed into a 300mm tube, you get a ton of radiant power in a small footprint. All that energy goes right where you point it, without crowding the rest of your machine. Inside, a halogen element sits in a quartz envelope, pumping out shortwave infrared that materials soak up quickly. The quartz tube handles the heat and keeps output steady, even when things are running hard. The R7s connector? It’s a practical choice. It carries high current, makes installation simple from end to end, and gives you a solid, reliable fit. No wiggle. No worry. Use this lamp when you need heat fast and under control—think plastic heating, curing, drying. It responds almost instantly, so you can cut down cycle times. Just keep in mind: that intense power density means your machine’s cooling and thermal management need to be up to the task. Size it right, and you’ll keep everything—components and surroundings—running safely.