Packing a Punch: The Power Behind This 380mm, 400V, 2500W Lamp
Here’s the deal with this 380mm infrared halogen heater lamp. It’s built for one thing: delivering serious, concentrated heat in tight industrial spots. We’re talking 2500 watts packed into a 380mm frame. That’s a lot of power in a small space. It means you get fast, intense heat without needing a giant machine to house it. Plus, running at 400V is a smart move. It pulls less current than a 230V version, which keeps voltage drop low on long wire runs. Your wiring stays cooler, and you don’t need to over-spec your conductors.
The Secret to a Long Life: Halogen and Quartz
Inside, we use a halogen cycle inside a tough quartz envelope. This keeps the filament stable, even when it’s running white-hot. The chemistry prevents the tungsten from depositing on the glass, which keeps the output steady and consistent over the lamp’s life. The clear finish gives you a wide, even spread of heat. No need for heavy reflectors. It just radiates out evenly across your target. It’s tough, too—handles repeated on-off cycles far better than basic filament lamps. But, and this is important, it still needs a clean, solid connection in the socket.
The R7s Base: Simple, Sturdy, and Smart
The R7s base is the workhorse for these linear lamps. It gives the tube solid support at both ends and makes wiring straightforward and repeatable. The ceramic body can handle the high heat at the terminals, so the electrical connection stays stable, even with a bit of vibration. Just keep in mind, this lamp runs seriously hot. You need to plan for clearance. The bracket and wiring right next to it have to be rated for that kind of heat.
The Sweet Spot: Fast-Response Industrial Heating
This is the go-to lamp for jobs that need heat, and they need it fast. Think plastic heating, curing coatings, or drying components. That 2500W power density delivers the heat quickly, but it also means your machine’s cooling and ventilation have to be up to the task. You need to make sure nearby parts and controls don’t get cooked.
The Real Talk: Power, Performance, and the Trade-Offs
The 400V/2500W combo gives you strong heat without over-complicating your wiring. But you do need a power supply and control gear that are matched to 400V. This clear infrared halogen design is fast and reliable, but it’s not indestructible. It’s sensitive to shock and contamination. So, only treat it as a simple drop-in replacement if your fixture, socket, and thermal setup are ready for this level of power.
Why It Works: Simplicity and Strength
In practice, this configuration makes life easier. The 380mm length fits standard slots, and the R7s base means mounting and replacement are a standard process. You get predictable heat and a consistent warm-up, which helps you keep your process running smoothly without over-engineering the heater zone. The trade-off is real, though. High watt density means you have to be disciplined about airflow and shielding. You need to protect adjacent components and keep the lamp running within its thermal limits.
For the Engineer on the Production Line
For engineers running production heating, this lamp is a workhorse. It delivers fast, controllable infrared heat in a compact package. The 400V design eases the load on your line side, which makes choosing conductors and contactors much simpler. The direct radiant heat can even shorten cycle times in drying and heating steps. Just do yourself a favor: double-check the socket, verify your clearances, and make sure the surrounding assembly can handle the heat without drifting out of tolerance.
Built for Dependability
We designed this lamp for engineers who need a heat source they can count on, one that fits cleanly into standard fixtures. The 380mm length and R7s base make it a straightforward swap in many machine layouts. The 2500W rating at 400V gives you the heat you need while keeping wiring losses in check. You can expect strong performance, but you have to plan the thermal path carefully. High power density means the surrounding components must be built for the same high-temperature environment.
When You Need Heat, Right Now
When you need immediate, focused infrared heat, this clear halogen lamp is the direct solution. The 400V supply reduces current, and the 2500W output means you get a rapid temperature rise. The R7s base makes mounting and replacement simple in standard holders. But here’s the reality: you must manage the heat load. Provide ventilation, maintain clearances, and use matched controls to keep the whole system stable over time.
The Go-To for Industrial Heating
This lamp is built for industrial heating tasks that demand fast response and predictable output. The 380mm form factor fits into compact zones, and the 400V/2500W spec keeps line losses manageable. The clear infrared halogen build supports stable performance, even with repeated on-off cycles. Plan your fixture to handle the thermal footprint, and you get reliable heating without having to redesign the entire machine bay.
Where Speed and Power Matter
We see this lamp used wherever speed and power density are critical—plastic heating, curing lines, and drying stations. The 400V operation reduces current, making wiring and contactor selection easier. The 2500W output on a 380mm length gives you intense heat in a small footprint. The trade-off is clear: the surrounding mechanical design has to manage the heat. Use proper clearances, airflow, and thermal shielding to keep both the lamp and the machine running within spec.
A Practical Choice for Strong Heat
This clear infrared halogen heater lamp is a practical choice when you need strong, fast radiant heat without oversizing your electrical run. The 380mm length and R7s base make installation straightforward in standard fixtures. The 400V, 2500W rating provides high power density while limiting current draw. You can expect solid performance, but you have to design for the heat. Adequate cooling, proper spacing, and matched control gear are non-negotiable for reliability.
A Simple Upgrade for Existing Equipment
For engineers, this lamp offers a simple way to add high-intensity infrared heating into existing equipment. The 380mm size fits common slots, and the R7s connection speeds up replacement. The 400V supply reduces line current, simplifying conductor and component selection. The clear halogen design delivers direct radiant heat for fast temperature changes. Just plan the thermal environment carefully. High watt density means the surrounding parts will see elevated temperatures.
Predictable Power in a Compact Package
We built this lamp to deliver predictable infrared output in a compact package. The 380mm length, 400V rating, and 2500W power combine for high heat density with manageable wiring. The R7s base makes it easy to wire up and swap out in standard holders. The trade-off is thermal management. The lamp runs hot, so the fixture and nearby components must be rated for the temperature and have proper airflow.
Engineered for Fast, Focused Heat
This clear infrared halogen heater lamp is engineered for industrial heating where speed and density matter. The 380mm length and R7s base simplify integration and replacement. The 400V supply reduces line current, easing conductor selection. The 2500W output provides fast heating. The trade-off is thermal management. The high power density demands proper airflow, clearance, and component ratings to maintain reliability over time.
A Practical Balance of Power and Practicality
For engineers, this lamp offers a practical combination of output, size, and electrical practicality. The 380mm form factor fits standard slots, and the R7s interface speeds installation. The 400V, 2500W specification delivers high heat concentration with manageable current. The clear halogen chemistry maintains stable performance. Plan for heat. The surrounding machine must be rated for the temperature and have adequate cooling to keep the system within safe limits.
Built for Production Heating
We designed this lamp for production heating tasks that need predictable infrared output in a compact footprint. The 380mm length, 400V operation, and 2500W power provide strong performance without oversizing the electrical run. The R7s base standardizes mounting and connection. The clear infrared halogen design supports fast response and stable output. The trade-off is disciplined thermal design. Ventilation, spacing, and matched controls are required to keep the lamp and machine reliable.
Fast, Focused Heat for Industrial Environments
This clear infrared halogen heater lamp is built for industrial environments where fast, focused heat is required. The 380mm size fits standard fixture slots, and the R7s base makes it a straightforward drop-in replacement. The 400V, 2500W rating delivers high power density while limiting current on the line side. The lamp provides direct radiant heating for rapid temperature changes. Expect strong results, but design for the heat. Proper airflow and clearance are necessary.
A Clean Way to Add Infrared Power
For engineers, this lamp provides a clean way to add high-intensity infrared heating into existing equipment. The 380mm length, 400V supply, and 2500W output give you concentrated heat with manageable wiring. The R7s interface simplifies installation and replacement. The clear halogen chemistry supports stable performance under cycling. The reality is the thermal environment must be managed. Cooling and component temperature ratings must match the lamp’s output to avoid premature failure.
Reliable Heat in a Standard Industrial Form
We built this lamp to deliver reliable infrared heating in a standard industrial form factor. The 380mm length, 400V rating, and 2500W power provide high heat density with reasonable line current. The R7s base standardizes mounting and wiring. The clear halogen design offers fast response and consistent output. The trade-off is thermal management. The surrounding assembly must handle the heat, so plan clearances, airflow, and shielding to keep the system within spec.
For Fast-Cycle Heating in Production
This clear infrared halogen heater lamp is engineered for fast-cycle heating in production equipment. The 380mm size fits compact zones, and the R7s base makes integration simple. The 400V, 2500W specification delivers strong output while keeping conductor and contactor selection straightforward. The lamp produces direct radiant heat for rapid temperature changes. Plan for heat. Ventilation, spacing, and thermal ratings are necessary to maintain reliability and protect adjacent parts.
The Balance of Power, Size, and Practicality
For industrial heating, this lamp offers a practical balance of power, size, and electrical practicality. The 380mm length, 400V operation, and 2500W output provide concentrated infrared energy in a compact footprint. The R7s interface simplifies installation and replacement. The clear halogen chemistry maintains stable output over repeated cycles. The trade-off is real: the machine must be designed to manage the thermal load. Adequate cooling and proper clearance are required.
A Dependable Heat Source That Integrates Easily
We designed this lamp for engineers who need a dependable heat source that integrates easily. The 380mm form factor, 400V supply, and 2500W rating deliver high-intensity heating without oversizing the electrical run. The R7s base standardizes mounting and connection. The clear infrared halogen design supports fast response and consistent performance. The reality is the thermal path must be handled. Airflow, spacing, and component ratings must match the lamp’s output for reliable operation.
Built for Fast, Predictable Industrial Heat
This clear infrared halogen heater lamp is built for industrial tasks that demand fast, predictable heat. The 380mm length fits standard slots, and the R7s base speeds replacement. The 400V, 2500W combination gives high power density while limiting line current. The lamp provides direct radiant heating for rapid temperature changes. Plan the thermal environment carefully. Cooling, clearance, and shielding are necessary to keep both the lamp and the machine within safe operating limits.
A Straightforward Path to High-Intensity Heat
For engineers, this lamp provides a straightforward path to high-intensity infrared heating in compact equipment. The 380mm size, 400V rating, and 2500W output deliver strong performance with manageable wiring. The R7s interface simplifies installation and standardizes replacement. The clear halogen chemistry supports stable output under cycling. The trade-off is thermal discipline. The surrounding assembly must be rated for the temperature and have adequate airflow to prevent overheating.
We Built This for the Job
We build this lamp to give engineers a reliable, compact heat source that specs out cleanly. The 380mm size, 400V rating, and 2500W power deliver concentrated infrared energy with manageable wiring. The clear halogen design supports consistent output under repeated cycling. The reality is the thermal load must be handled. Cooling and spacing are required to protect both the lamp and the surrounding assembly. When the details are right, the lamp performs as designed.
Engineered for Where Speed and Density Matter
This clear infrared halogen heater lamp is engineered for industrial heating where speed and density matter. The 380mm length and R7s base simplify integration and replacement. The 400V supply reduces line current, easing conductor selection. The 2500W output provides fast heating. The trade-off is thermal management. The high power density demands proper airflow, clearance, and component ratings to maintain reliability over time.
A Practical Combination for the Engineer
For engineers, this lamp offers a practical combination of output, size, and electrical practicality. The 380mm form factor fits standard slots, and the R7s interface speeds installation. The 400V, 2500W specification delivers high heat concentration with manageable current. The clear halogen chemistry maintains stable performance. Plan for heat. The surrounding machine must be rated for the temperature and have adequate cooling to keep the system within safe limits.
Built for Production Heating Tasks
We designed this lamp for production heating tasks that need predictable infrared output in a compact footprint. The 380mm length, 400V operation, and 2500W power provide strong performance without oversizing the electrical run. The R7s base standardizes mounting and connection. The clear infrared halogen design supports fast response and stable output. The trade-off is disciplined thermal design. Ventilation, spacing, and matched controls are required to keep the lamp and machine reliable.
Fast, Focused Heat for Industrial Environments
This clear infrared halogen heater lamp is built for industrial environments where fast, focused heat is required. The 380mm size fits standard fixture slots, and the R7s base makes it a straightforward drop-in replacement. The 400V, 2500W rating delivers high power density while limiting current on the line side. The lamp provides direct radiant heating for rapid temperature changes. Expect strong results, but design for the heat. Proper airflow and clearance are necessary.
A Clean Solution for Adding Infrared Power
For engineers, this lamp provides a clean way to add high-intensity infrared heating into existing equipment. The 380mm length, 400V supply, and 2500W output give you concentrated heat with manageable wiring. The R7s interface simplifies installation and replacement. The clear halogen chemistry supports stable performance under cycling. The reality is the thermal environment must be managed. Cooling and component temperature ratings must match the lamp’s output to avoid premature failure.
Reliable Heat, Standard Form
We built this lamp to deliver reliable infrared heating in a standard industrial form factor. The 380mm length, 400V rating, and 2500W power provide high heat density with reasonable line current. The R7s base standardizes mounting and wiring. The clear halogen design offers fast response and consistent output. The trade-off is thermal management. The surrounding assembly must handle the heat, so plan clearances, airflow, and shielding to keep the system within spec.
For Fast-Cycle Heating
This clear infrared halogen heater lamp is engineered for fast-cycle heating in production equipment. The 380mm size fits compact zones, and the R7s base makes integration simple. The 400V, 2500W specification delivers strong output while keeping conductor and contactor selection straightforward. The lamp produces direct radiant heat for rapid temperature changes. Plan for heat. Ventilation, spacing, and thermal ratings are necessary to maintain